Index >PRODUCTS> Power Equipment> Strain clamp series

aluminum alloy strain clamp (bolt type)(NLL)


Product Details:



耐张线夹 strain clamp
耐张线夹主要用于架空电力线路或变电所固定导线和避雷线,并通过连接金具与耐张绝缘子相连,或将避雷线与杠塔相连。按结构安装方式的不同分为螺栓式、
压缩型和楔型三大类,压缩性又分为分液压和爆压两种
产品型号中字母数字的意义为:
N-耐张线夹 L-螺栓型 D-倒装式 B-爆压型
数字表示适用导线组合号(或适用钢绞线标称截面,分子表示铝截面,分母表示钢截面)
附加字母:A-引流0 B-引流30
螺栓型耐张线夹的曲率半径补小于被安装导线直径的8倍。耐张线夹导线的最小握力与导线计算拉断力的百分比如下表:
Strain clamps are used to fix condcutor and ground wire through insulators or link fitting to tower arms or substation structures.in according to the clamps
construction and mounting way the clamps include two types as compression type and bolt type,the compression type include hydraulic and explosive type
The meaning of the letter & arabic figure in the catalog are shown as follow:
N-strain clamp L-bplt type D-inverse mounting Y-hydraulic type B-explosive type
The figures mean the of assembled leads which apply to each other numbers
Additional letter:A-jumper 0 B-jumper 35 .the radius of curvature is more than eight fold diameter of the suitable conductor,the percentage minimum slip
strength of clamp to rated ultimate strength of conductor os shown in the following table
适用范围place 型式type 百分比%percentage%
电力线路 electric power line 压缩型compression 95
螺栓型bolt 90
注:对特大截面积导线,扩径导线和绝缘线用耐张线夹,其握力可取65%
螺栓型耐张线夹用于钢芯铝绞线和铝绞线时,可在导线外架缠铝包带或
护线条,其适用导线外径包括缠物
AS the bolt type strain clamp is used to AAC and ACSR.the conductor
may bewound by aluminum tape or preformed armour rads for pretecting
1、螺栓型铝合金耐张线夹 aluminum alloy strain clamp (bolt type)
型号
catalog No.
适用导线范围 application conductor(mm) C M U型螺栓 U bolt 标称破坏荷重rated failure load(kn)
M 个数
NLL-1 5.0~10.0 18 16 M12 2 40
NLL-2 10.0~14.0 18 16 M12 2 40
NLL-3 14.0~18.0 28 18 M14 3 70
NLL-4 18.0~23.0 34 18 M14 3 90
NLL-27 12.48~21.66 27 18 M16 4 90
NLL-5 23.0~29.0 36 18 M16 5 100
NLL-6 25.9~32.67 40 22 M16 5 100
适用于10kv及以下架空线路中,在耐张杆上固定铝绞线或钢芯铝绞线
NLL series is suitable for aerial line up to 35kv fixing aluminum wire or steel core aluminum wire on the strain pole