PRODUCTS

Copper products > Low oxygen copper Cup Power Equipment > Strain clamp series Substation Fitting series Aerial insulation conduct... Terminal connector series Suspension clamp series Strain Clamps Series Splicing Fitting series Protective Fitting series T-Connector series Wire and cable > Other products >

Index >PRODUCTS> Power Equipment> Aerial insulation conductor fitting series

JBC series punctured cord grip


Product Details：



JBC 系列穿刺线夹(1kV/10kV)JBC series punctured cord grip (1kV/10kV)
■ 用 途 Application ■ 产品特点 Products feature
JBC（1kV）系列穿刺线夹适用于1kV及以下架空绝缘导线的支接和连续。
Punctured cord grip of JBC (1kV )is applied to combination of the insulated conductor in the sky at 1kV or under 1kV. 		◆ 穿刺结构，力矩螺母，确保穿刺压力，安装方便
◆ 结构密封，防腐蚀，使用寿命长
◆ 接触电阻小，线夹温升低
◆ 异径导线连接，适用范围广
◆ 绝缘性能优良，1kV 耐电压大于4kV,10kV耐电压大于18kV
◆ Procture structure,torque nut.to insure the puncture pressure,and it’s easy to fix.
◆ pressurized structure,corrosion protection,and have a longevity of service
◆ contact resistance is small,and the temperature of cord grip is low.
◆ It’s connected with different pathway lead.and it’s useful.
◆ insulating propertry is wonderful,1kV withstand voltage is bigger than 4kV,10kV withstand voltage is bigger tha 18kV.
1.把支线放入线夹，盖好护套
2.将主线放入线夹，用手扭紧力矩螺母
3.用套筒扳手拧紧力矩螺母
4.拧紧力矩螺母直至断开并盖好该导线防护即可。
1) put the lateral into the clip,and cove them with jacket.
2) put the main lead into the clip,and screw the torque nut by hand
3) screw down the torque nut by box spnner
4) screw down the torque nut until it was cut ,and cover the lead helmet, 		■ 规格及技术参数 Specification
型号
Catalog.No. 		主线规格
Main wire 		分支线规格
Branch wire 		螺栓数量
Number of bolts 		扭矩值
N.m 		主要尺寸(mm)
Dimensions (mm)
H R L
JBC-16-70/16-70 16~70mm2 16~70mm2 1 20 53 52 85
JBC-16-95/4-35 16~95mm2 4~35mm2 1 16 45 46 82
JBC-50-120/16-50 50~120mm2 16~50mm2 1 20 53 55 85
JBC-50-120/50-120 50~120mm2 50~120mm2 1 20 53 60 85
JBC-120-240/70-120 120~240mm2 70~120mm2 2 20 79 59 95
JBC-120-240/120-240 120~240mm2 120~240mm2 2 20 79 64 95
■ 用 途 Application
■ 规格及技术参数 Specification
JBC (10kV)系列穿刺线夹适用于架空绝缘线路中从主线引出分支线的连接，或用于两个耐张段之间的跳线的接续。
Puncture cord grip of JBC kind (10kV) is applied to the lateral lead connection which is educed from the main lead in the insulated conductor in the sky.Or it is applied to the contact between two different anti-tensile stress section.
型号
Catalog.No. 		主线规格
Main wire 		分支线规格
Branch wire 		螺栓数量
Number of bolts 		扭矩值
N.m 		主要尺寸(mm)
Dimensions (mm)
H R L
JBC10-1 25~50mm2 25~50mm2 2 30 80 68 114
JBC10-2 70~120mm2 25~50mm2 2 30 80 73 114
JBC10-3 70~120mm2 701~120mm2 2 30 50 75 114
JBC10-4 150~240mm2 70~120mm2 2 30 50 81 114
JBC10-5 150~240mm2 150~240mm2 2 30 50 85 114
JBC10-6 150~240mm2 25~50mm2 2 30 50 82 114